Honda Power Equipment WB20

$599.00

$599.00

Key Features

Availability Brochure
MakeHonda Power Equipment
ModelWB20

Product Features

Description

2" general purpose water pump

Key Features
  • 164 gal./min. capacity
  • Durable silicon carbide mechanical seal
  • Cast iron volute and impeller
Features
  • Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
  • Durable silicon carbide mechanical seal: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
  • 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
  • Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
  • Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
  • Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
  • Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
  • 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
  • Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
  • Engine: GX120
  • Displacement: 118cc
  • Bore and stroke: 2.4 in. x 1.7 in.
  • Compression Ratio: 8.5:1
  • Oil Alert: Std
  • Pump Type: Centrifugal, Self-priming
  • Volute: Rigid Mounted Cast Iron
  • Impeller: 4 Vane Cast Iron
  • Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
  • Priming time: 110 sec @ 16.4 ft.
  • Drive system: Direct
  • Discharge capacity: 164 gpm
  • Suction port diameter: 2 in. NPT
  • Discharge port diameter: 2 in. NPT
  • Total head lift: 105 ft.
  • Suction head lift: 25 ft.
  • Maximum pressure: 45 psi
  • Solids handling: N/A
  • Dimensions (LxWxH): 19.3 in. x 14.4 in. x 16.5 in.
  • Dry weight: 44 lb.
  • Fuel Capacity: 0.53 gal
  • Run Time @ Max Discharge: 1.7 hr
  • Strainer Part #: 78325-YG3-000
  • Residential Warranty: 3 years
  • Commercial Warranty: 3 years
  • CA Compliant: Yes
NOTES:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Engine

Engine Manufacturer Honda
Engine Displacement 118cc
Bore and Stroke 2.4 in. x 1.7 in.

General

Pump Style Centrifugal, Self-priming
Impeller 4 Vane Cast Iron
Drive System Direct
Discharge Capacity 164 gpm
Discharge Port Diameter 2 in. NPT
Suction Diameter 2 in. NPT
Head Lift 105 ft.
Suction Head Lift 25 ft.
Max Pressure 45 psi
Weight 44 lb.

Shopping Tools

WARNING: Operating, servicing, and maintaining a passenger vehicle, an off-highway motor vehicle, or a recreational marine vessel can expose you to chemicals including engine exhaust, carbon monoxide, phthalates, and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm.To minimize exposure, avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or vessel in a well-ventilated area and wear gloves or wash your hands frequently when servicing your vehicle or vessel. For more information go to https://www.p65warnings.ca.gov/products/passenger-vehicle and https://www.p65warnings.ca.gov/products/marine.